
Figure 1 - Location map of soil sampling sites. BERR is located
on the Cochranton, PA 7.5 minute quadrangle.

Figure
2 - Students taking soil core samples
|
In
the fall of 2000, the hydrogeology class (Geo 400) collected
soil cores at two locations within Bousson Environmental
Research Reserve (BERR) to examine soil physical properties
as a function of topography. Figure 1 is a location map of
the upland and lowland sites.
Soil
cores were collected by the students using a xxxxx. Each
sample was collected in a x by y cm brass ring. Field-moist
samples were weighed on a portable balance (to the nearest
0.01 g), oven dried overnight at 105° C and reweighed.
Four
soil properties were calculated for each sample: dry bulk
density (ρb), porosity (n), gravimetric
water content (θg) and volumetric water
content (θv). Equations for these calculations
can be found in section 6.2 of Fetter (2001). Tables
1 and 2 are the results of these calculations.
References cited:
Fetter, C. W., 2001. Applied Hydrogeology (fourth edition). NJ: Prentice
Hall, Inc. 598 pp. |
| Physical
characterization of soils, Bousson Environmental Research
Reserve (BERR) |
| |
|
|
|
|
|
| Table 1: Raw data
from collected sediment samples at a) upland and
b) lowland site. |
| |
|
|
|
|
|
| a) |
Field core |
Tare wt. |
Field moist |
Oven-dried |
|
| Depth, cm1 |
& foil, g |
of foil, g |
sample, g |
sample, g |
|
| 39.5 |
64.8 |
3.4 |
61.4 |
52.8 |
|
| 47.5 |
136 |
4.8 |
131.2 |
120 |
|
| 52.5 |
162.1 |
2.7 |
159.4 |
149 |
|
| |
|
|
|
|
|
| 1 All sampled intervals spanned 5 cm; value listed is the
midpoint of each sample core. |
| |
|
|
|
|
|
| b) |
Field core |
Tare wt. |
Field moist |
Oven-dried |
|
| Depth, cm1 |
& foil, g |
of foil, g |
sample, g |
sample, g |
|
| 22.5 |
182.6 |
4 |
178.6 |
149.5 |
|
| 27.5 |
189.9 |
3.6 |
186.3 |
156.8 |
|
| 36.5 |
132.2 |
4 |
128.2 |
110.6 |
|
| 41.5 |
150 |
4.2 |
145.8 |
128.5 |
|
| 51.5 |
185.5 |
3.4 |
182.1 |
155.2 |
|
| |
|
|
|
|
|
| Table 2: Physical soil properties as a function of depth. |
| |
|
ρb |
n |
θ g |
θ v |
| Upland |
Depth, cm1 |
g/cm3 |
cm3/cm3 |
cm3/cm3 |
cm3/cm3 |
| |
39.5 |
0.54 |
0.80 |
0.14 |
0.08 |
| |
47.5 |
1.22 |
0.54 |
0.09 |
0.10 |
| |
52.5 |
1.52 |
0.43 |
0.07 |
0.10 |
| |
|
|
|
|
|
| Lowland |
22.5 |
1.52 |
0.43 |
0.16 |
0.25 |
| |
27.5 |
1.60 |
0.40 |
0.16 |
0.25 |
| |
36.5 |
1.13 |
0.57 |
0.14 |
0.15 |
| |
41.5 |
1.31 |
0.51 |
0.12 |
0.16 |
| |
51.5 |
1.58 |
0.40 |
0.15 |
0.23 |
| |
|
|
|
|
|
| Mean value, upland |
|
1.37 |
0.48 |
0.08 |
0.10 |
| Mean value, lowland |
|
1.43 |
0.46 |
0.14 |
0.21 |
|